H.R. 5880

119 HR 5880 IH: Fight Illicit Pill Presses Act
 U.S. House of Representatives
 2025-10-31
 text/xml
 EN
 Pursuant to Title 17 Section 105 of the United States Code, this file is not subject to copyright protection and is in the public domain.
 I
 119th CONGRESS  1st Session
 H. R. 5880
 IN THE HOUSE OF REPRESENTATIVES
 October 31, 2025
  Ms. Hageman  (for herself,  Ms. Stansbury ,  Mr. Crenshaw ,  Mr. Harder of California , and  Mr. Fry ) introduced the following bill; which was referred to the  Committee on Energy and Commerce , and in addition to the Committee on  the Judiciary , for a period to be subsequently determined by the Speaker, in each case for consideration of such provisions as fall within the jurisdiction of the committee concerned
 A BILL
To amend the Controlled Substances Act to require regulated persons to identify tableting machines and encapsulating machines by serial number.
1.
Short title
This Act may be cited as the   Fight Illicit Pill Presses Act  .
2.
Regulation of certain machines
(a)
Definitions
Section 102 of the Controlled Substances Act ( 21 U.S.C. 802 ) is amended—
(1)
by striking paragraph (38) and inserting the following:
(38)
The term  regulated person  means a person who—
(A)
manufactures, distributes, imports, or exports a listed chemical;
(B)
manufactures, distributes, delivers, sells, imports, or exports a tableting machine, an encapsulating machine, or a critical part; or
(C)
who acts as a broker or trader for an international transaction involving a listed chemical, a tableting machine, an encapsulating machine, or a critical part.
 ;
(2)
by striking paragraph (39)(B) and inserting the following:
(B)
a distribution, delivery, sale, importation, or exportation of a tableting machine, encapsulating machine, or critical part.
 ; and
(3)
by adding at the end the following:
(60)
The term  critical part , when used in reference to a tableting machine or encapsulating machine, means any of the following integral parts of a tableting or encapsulating machine:
(A)
An upper punch.
(B)
A lower punch.
(C)
A die.
(61)
The term  die  means a tool that serves as the mold in which a product is compressed to form the desired size and shape of a tablet or capsule.
(62)
The term  lower punch  means the punch inserted into the turret below the die.
(63)
The term  punch  means a rod-shaped tool used in producing tablets and other products.
(64)
The term  upper punch  means the punch inserted into the turret above the die.
 .
(b)
Regulation
(1)
Records of regulated transactions
Section 310(a) of the Controlled Substances Act ( 21 U.S.C. 830(a) ) is amended by adding at the end the following:
(4)
Each regulated person who manufactures, distributes, delivers, sells, imports, or exports a tableting machine, an encapsulating machine, a critical part of a tableting machine, or a critical part of an encapsulating machine shall, when and as required by regulations of the Attorney General, identify the tableting machine, encapsulating machine, critical part of a tableting machine, or critical part of an encapsulating machine by means of a serial number that is engraved, cast, or otherwise permanently affixed to a nonremovable part of the tableting machine, encapsulating machine, or critical part of a tableting machine, or critical part of an encapsulating machine.
 .
(2)
Reports to attorney general
Section 310(b)(1) of the Controlled Substances Act ( 21 U.S.C. 830(b)(1) ) is amended by striking subparagraph (D) and inserting the following:
(D)
any regulated transaction in a tableting machine, encapsulating machine, or critical part, including the serial number affixed to the tableting machine, encapsulating machine, or critical part.
 .
(3)
Regulations
(A)
In general
Not later than 180 days after the date of enactment of this Act, the Attorney General shall promulgate regulations carrying out the amendments made by paragraph (1).
(B)
Detailed guidance
The regulations required under subparagraph (A) shall include detailed guidance on serial numbers affixed to tableting machines, encapsulating machines, or critical parts manufactured on or before the date of enactment of this Act.
(C)
Requirement
Notwithstanding paragraph (4), a serial number affixed to a tableting machine, encapsulating machine, or critical part manufactured on or before the date of enactment of this Act in accordance with the guidance provided under subparagraph (B) shall be deemed required under paragraph (4) of section 310(a) of the Controlled Substances Act, as added by paragraph (1) of this subsection.
(4)
Effective date
The amendments made by paragraph (1) shall apply only to any tableting machine, encapsulating machine, or critical part manufactured, distributed, delivered, sold, imported, or exported after the effective date of the regulations promulgated under paragraph (2).
(c)
Prohibited acts
Section 403(a) of the Controlled Substances Act ( 21 U.S.C. 843(a) ) is amended—
(1)
in paragraph (8), by striking  or  at the end;
(2)
in paragraph (9), by striking the period at the end and inserting a semicolon; and
(3)
by adding at the end the following:
(10)
to remove, alter, or obliterate any serial number affixed to a tableting machine, encapsulating machine, a critical part of a tableting machine, or a critical part of an encapsulating machine, that is required to have a serial number and with reasonable cause to believe the serial number is so required; or
(11)
to transport, ship, receive, possess, distribute, deliver, sell, import, or export any tableting machine, encapsulating machine, a critical part of a tableting machine, or a critical part of an encapsulating machine that is required to have a serial number, knowing that the serial number has been removed, altered, or obliterated, and with reasonable cause to believe the serial number is so required.
 .